黄色的美女图片视频大全

  • <td id="vdfog"><ruby id="vdfog"></ruby></td>

      1. <track id="vdfog"><ruby id="vdfog"><menu id="vdfog"></menu></ruby></track>

          MG-SS Series Automatic Blow Molding machines

          Brief Introduction

          Mega Machinerys’ SS Series automatic linear PET blow moulding machines was designed with two principles in mind. One, to lower the running cost for the bottle producer and two, provide easy operation. The MG-SS Series PET blow moulding machines lowers your production costs so you can achieve maximum profits in your competitive bottling market, the MG-SS series blower reduces your energy expenses by up to 30% at a maximum output of 1500BPH for the signal cavity machine. Thanks to our GM Mr. Cai Yunsen who developed the patented process for spacing the performs which maximizes the performance of the MG-SS series PET blow moulding machine.

          Overview

          * PLC controller
          MG-SS series PET blow moulding machines adopts the famous Delta controller system. It integrates a self-diagnosis program, all warning information is shown through the friendly touch interface featuring an alarm system. Also, the controller shows the actual blowing speed during production.

          * Cast molded platen with toggle clamping unit
          Cast molded platens offer the longest service life, and enhance the stability of the machine. Engineering software analyzed and optimized the clamping system to guaranty the fastest possible moving speed and strongest clamping force. Also an additional high pressure compensation system is standard equipment and ensures the perfect clamping result.

          * Infrared heating system
          A Zoned and layered heating system with an advanced venting unit keeps the temperature accurate and uniform, this is the key to manufacturing high quality plastic bottles. The lamps can also be adjusted horizontally and vertically inside the specially designed heating oven. This ensures the distribution of heat meets the different shapes of the preforms.

          * Stretching system
          A double cylinder stretching unit is standard equipment and ensures the fastest possible stretching speed, and the longest possible stretching stroke. Linear motion guides provide ultra smooth movement and the lowest possible friction coefficient.

          * Patented perform spacing system
          The patented perform spacing system sets the preform adapters 120mm apart at the blowing station by mechanical function and also improves the moving speed.

          * Preform loading & bottle discharging system
          Famous brand pneumatic parts guarantee the machines reliable performance and long service life while Linear motion guides improve the moving speed. Special grip units are designed to be changed easily.

          Features

          1. Full automatic running with theoretical output capacity up to 4500 bottles per hour for 0.1L volume using four-cavity blow mold
          2. Patented loading system carries the preform automatically with less moving parts.
          3. Suitable to produce 0.1 ~ 2.5L Standard neck PET container
          4. Advanced PLC control system with a use-friendly control panel
          5. Built-in memory of the PLC saves all the sets of numbers required to produce different size bottles.
          6. Multiple Reliable sensor systems monitors the machine’s automatic function
          7. Equipped with special designed air storage unit
          8. Powerful heating unit with precision controller and convenient adjusting mechanism.
          9. Cooling system that provides a perfect cooling result
          10. Compact design that saves space
          11. Simple installation & startup operation
          12. minimal transfer space for the air distribution system.

          Bottle SamplesPET bottles produced by SS series automatic reheat PET stretch blow molding machine:

          CSD 3L

          PET Jar-5L

          Detergen 500ml PET bottle

          pharmacal 50ml

          Edible oil 4500ML

          water bottle 1L

          Specification

          General InformationMG-SS2BFMG-SS3BFMG-SS4SFMG-SS4BF
          Clamping Force35T35T35T60T
          Clamping Stroke130mm130mm90mm130mm
          Max. Stretching Stroke400mm400mm320mm400mm
          Bottom Moving Stroke70mm70mm70mm70mm
          Number of Cavities2 cavity3 cavity4 cavity4 cavity
          Theoretical Output3000BPH4000BPH5200BPH4500BPH
          Max. Mould Thickness300mm300mm200mm310mm
          Electrical System
          Voltage Standard380v/3PH/50Hzor special order
          Number of Heating Zone2 Sections3 Sections4Sections4Sections
          Total Power (Full Loaded) 35KW48KW48KW48KW
          Container
          Max. Container Volume2.5L2.5L0.75L2.25L
          Neck Diameter Range32mm32mm32mm32mm
          Max. Container Diameter110mm110mm73mm110mm
          Max. Container Height350mm350mm220mm360mm
          Air system
          Low Air consumption8-10Bar8-10Bar8-10Bar8-10Bar
          High Air consumption≤35 Bar≤35 Bar≤35 Bar≤35 Bar
          Dimension & Weight
          Blow molding machine3.37x2x2.2 m2.95×2.25×2.2m3.65×1.9×2.2m3.66×2.16x2m
          Preform Autoloader2.1×1.3×2.55m2.4×1.4xx2.7m2.5×1.6×2.7m2.4×1.4×2.7m
          Net Weight3T4T4T4.5T
          General InformationMG-SS6SFTMG-SS6SFMG-SS6MFTMG-SS6MF
          Clamping Force70T45T70T75T
          Clamping Stroke90mm90mm120mm110mm
          Max. Stretching Stroke320mm320mm350mm350mm
          Bottom Moving Stroke70mm70mm70mm70mm
          Number of Cavities6 cavity6 cavity6 cavity6 cavity
          Theoretical Output7000 BPH9000BPH6700 BPH8200BPH
          Max. Mould Thickness200mm200mm320mm250mm
          Electrical System
          Voltage Standard380v/3PH/50Hzor special order
          Number of Heating Zone4 Sections6 Sections4 Sections8 Sections
          Total Power (Full Loaded) 64 KW90KW96 KW120kw
          Container
          Max. Container Volume0.75L0.75L1.5L1.5L
          Neck Diameter Range32mm32mm32mm38mm
          Max. Container Diameter70mm70mm85mm105mm
          Max. Container Height220mm220mm320mm280mm
          Air system
          Low Air consumption8-10Bar8-10Bar8-10Bar8-10Bar
          High Air consumption30-35 Bar30-35 Bar30-35 Bar30-35 Bar
          Dimension & Weight
          Blow molding machine3.8x2x2.2m4.9×2.2×2.3m4.6×2.25×2.2m4.9×2.2×2.3m
          Preform Autoloader3.4×1.6×3.3m2.5×1.8×2.7m3.4×1.6×3.3m2.5×1.8×2.7m
          Net Weight7T8T8T9T
          General InformationMG-SS6BFTMG-SS6BFMG-SS8SFMG-SS10SFMG-SS12SF
          Clamping Force70T45T45T75T90T
          Clamping Stroke130mm130mm90mm90mm110mm
          Max. Stretching Stroke350mm370mm320mm320mm350mm
          Bottom Moving Stroke70mm70mm70mm70mm70mm
          Number of Cavities6 cavity6 cavity8 cavity10 cavity12 Cavity
          Theoretical Output6500 BPH8000BPH12000BPH14000BPH16000 BPH
          Max. Mould Thickness320mm250mm200mm200mm200mm
          Electrical System
          Voltage Standard380v/3PH/50Hzor special order
          Number of Heating Zone4 Sections8 Sections6 Sections10 Sections12 Sections
          Total Power (Full Loaded) 96 KW120kw100KW150KW170KW
          Container
          Max. Container Volume2.5L2.5L0.75L0.75L0.75L
          Neck Diameter Range32mm38mm32mm32mm32mm
          Max. Container Diameter110 mm85mm70mm70mm70mm
          Max. Container Height360mm350mm220mm220mm280mm
          Air system
          Low Air consumption8-10Bar8-10Bar8-10Bar8-10Bar8-10Bar
          High Air consumption30-35 Bar30-35 Bar30-35 Bar30-35 Bar30-35 Bar
          Dimension & Weight
          Blow molding machine5.6×2.25×2.2m5.6×2.1×2.3m5.4X2.1X2.3m6.4×2.1×2.3m_ _
          Preform Autoloader3.4×1.6×3.3m2.5×1.8×2.7m2.5×1.8×2.7m2.5×1.8×2.7m_ _
          Net Weight8T9T9T10T_ _

          Mega Machinery, the Professional PET Blow Moulding Machine supplier in China.

          Note: PET stretch blow molding machine is also known as Reheat stretch blow molding machines, Stretch blow molding machines, bottle blowing machine, blowing machines and PET blow molding machine.

          黄色的美女图片视频大全
        1. <td id="vdfog"><ruby id="vdfog"></ruby></td>

            1. <track id="vdfog"><ruby id="vdfog"><menu id="vdfog"></menu></ruby></track>